KOSWIRE

TITANIUM WIRE & BAR

KOSTI which is our Tatanium wire & bar products are used for several industries such as general industries, medical and aerospace.
It is produced in tight quality control for fine and even microstucture with high strength also to meet customer's varios quality requirments depend on it’s final application.

Medical Application /
Surgical & Dental Implant
Industrial Cold Heading
Aerospace Industries

Titanium Grade 4 / Pure Titanium

Chemical Composition

Element	N	C	H	Fe	O	Ti
%	Max. 0.05	Max. 0.08	Max. 0.015	Max. 0.50	Max. 0.40	Bal.

Specification : ASTM F67

Available Diameter : 3.0~10.00MM

Diameter Tolerance : As per ISO286 , h6

Tensile Strength : As per Customer's requirement ; Levels in 750 Mpa, 850 Mpa, 930 Mpa.

Surface : Bright with Centerless Grinding.

Packaging : 2.0~4.00 Meter Bar with good straightness for CNC machine.

Titanium Grade 23 / Ti-6Al-4V ELI (Also available Ti Grade 5)

Chemical Composition

Element	N	C	H	Fe	O	Al	V	Ti
%	0.05	0.08	0.012	0.25	0.13	5.5 ~ 6.5	3.5 ~ 4.5	Bal.

Specification : ASTM F136

Available Diameter : 3.0~8.00MM

Diameter Tolerance : As per ISO286 , h6

Tensile Strength : Min 860 Mpa with E/L (4D,%) Min 10

Surface : Bright with Centerless Grinding.

Packaging : 2.0~4.00 Meter Bar with good straightness for CNC machine.

Titanium Grade 2 / Pure Titanium

Chemical Composition

Element	N	C	H	Fe	O	Ti
%	Max. 0.03	Max. 0.08	Max. 0.015	Max. 0.30	Max. 0.25	Bal.

Specification : ASTM B863

Available Diameter : 2.0~12.00MM

Diameter Tolerance : Precise diameter tolerance available as per customer's requirement

Tensile Strength : Soft ~ Hard

Surface : Special Coating for Cold Heading.

Packaging : 10~200Kgs coil

Titanium Grade 5 / Ti-6Al-4V

Chemical Composition

Element	N	C	H	Fe	O	Al	V	Ti
%	0.05	0.08	0.0125	0.3	0.2	5.5 ~ 6.75	3.5 ~ 4.5	Bal.

Specification : ASTM 4928

Available Diameter : 3.0~12.00MM

Diameter Tolerance : As per AMS 2241

Tensile Strength : As per AMS 4928

Surface : Special Coating for warm & hot heading process.

Packaging : 2.5~4.00 Meter Bar with good straightness for CNC machine.
10 ~ 200Kgs Coil or Carrier